Power supply
Device converting electric current to power electrical loads.
Last updated
Some power supplies can operate in all four quadrants of the voltage/current plane, generating both positive and negative outputs.[1] Some SMPS designs have a minimum output current threshold and cannot operate below that level.[2]
Quick Facts
- Types
- Linear
- switched-mode
- capacitive (transformerless)
- Packaging
- Bench
- open frame
- rack mount
- integrated
- external (AC adapter, wall wart)
Facts from the source article.
Key facts and history
Some switched-mode supplies have a minimum current output and cannot function below that level.[2] Programmable power supplies increasingly use Ethernet interfaces for cost-effective integration with automated test benches.[3] More recent implementations also offer Ethernet via TCP/IP or UDP, or SFP links for deterministic control.[3] A bipolar power supply operates in all four quadrants, meaning it can generate positive and negative voltages and currents.[4]
Bipolar supplies can move smoothly from positive, through zero, to negative voltages without relays.[1] They are effectively large dc-coupled power amplifiers, sometimes called bipolar power amplifiers.[1] Bipolar supplies provide much higher bandwidth than regular supplies, enabling sub-millisecond pulse widths.[1] To protect against shorts, switched-mode power supplies may incorporate current limiting or a crowbar circuit that triggers a shutdown upon detecting an abnormally high current draw.[5]
Relay-based polarity switching causes power interruption during reversal, an issue that bipolar power supplies avoid.[1]
What the cited sources add
They can also test batteries, using only two quadrants since voltage never goes negative.[1] For solar-cell testing, a bipolar supply can absorb current and act as an electronic load in quadrant 2.[1] Zollo explains that bipolar supplies are typically much more expensive than unipolar counterparts due to design complexity.[1] Most power-supply manufacturers do not offer a wide variety of bipolar supplies, making them specialty products.[1]
Most bipolar power supplies are linear, making them large and heavy, especially at high power.[1] According to Bob Zollo of Agilent, bipolar power supplies are well-suited for testing magnetic and inductive devices like motors, inductors, and coils because they can produce both positive and negative voltages and currents.[1]
References
- "Bipolar Power Supplies Run The Voltage Gamut", Electronic Design, 2012-10-19. facts only, no text reused. electronicdesign.com
- Wikipedia, "Power supply" (CC BY-SA 4.0), which cites: "Switching power supply operating at little or no load - US Patent 5402059 Description" (original not read by us) en.wikipedia.org
- Wikipedia, "Power supply" (CC BY-SA 4.0), which cites: "A novel digital magnet power supply approach", CERN Indico (original not read by us) en.wikipedia.org
- Wikipedia, "Power supply" (CC BY-SA 4.0), which cites: "Bipolar Power Supplies Run The Voltage Gamut", Electronic Design, 2012-10-19 (we also read that source) en.wikipedia.org
- Wikipedia, "Power supply" (CC BY-SA 4.0), which cites: "High efficiency direct coupled switched mode power supply - US Patent 4937722 Description" (original not read by us) en.wikipedia.org
Each numbered sentence above was checked against the source it cites before publication. Sentences citing Wikipedia adapt text from the English Wikipedia article Power supply (contributors), used under CC BY-SA 4.0; this entry is available under the same licence. Other sources were used for facts only; no text or images are copied from them.
More in Energy & Power
Sources
Compiled from Wikipedia and the sources listed below. Text from Wikipedia is available under CC BY-SA 4.0; this entry is adapted from it.
- Wikipedia: Power supply (CC BY-SA 4.0).
Spotted an error? Know more?
Reader corrections go straight into our review queue. Suggest an edit · How this site is sourced
