Russian Inventions Codexery

ASM-DT amphibious rifle

Russian prototype dual-medium assault rifle for frogmen.

Last updated

The ASM-DT is a Russian prototype assault rifle with a folding stock, designed for use both underwater and above water. It was developed in the 1990s.

Naval Spetsnaz combat frogmen on assault missions needed a weapon that provided equal firepower in both environments. The existing APS underwater rifle was inaccurate above water, with an effective range of only 50 meters, and its barrel life dropped from roughly 2,000 rounds to 180–200 rounds when used out of water. Frogmen often carried an SPP-1 pistol for underwater combat and an AK-74 for surface use, but this arrangement was considered unsatisfactory. In 1991, the Artillery Engineering Institute in Tula, Russia, started the ASM-DT project, led by engineer Yuriy Danilov.

To work in both media, the rifle required a long smoothbore barrel for underwater firing and a rifled barrel for effective range above water. Danilov solved this by designing the rifle to fire two types of ammunition: 5.45×39 mm 7N6 (a standard Soviet round) and 5.45×39 mm MGTS (underwater ammunition, also known as 5.66×39/120 mm MPS). The ASM-DT has two feed slots to accept two magazines simultaneously—APS magazines underwater and AK-74 magazines above water.

The magazine release shifts forward when using AK-74 magazines, and the gas system adjusts automatically for firing out of water. The barrel is rifled but has shallow grooves that vent some gases ahead of the bullet, clearing water from the barrel to prevent bursting if the rifle is brought to the surface and fired immediately. The rifle can mount a GP-25 grenade launcher, a bayonet, or a PBS sound and flash suppressor. Other accessories include a flame arrestor, a blank firing device (UPMS), optical and night sights, and tactical lights.

The folding stock, pistol grip, and handguard are made of impact-resistant plastic. The ASM-DT’s combat effectiveness is comparable to the AK-74 in air and the APS underwater.

The Tactical Gap That Spawned a New Weapon

The APS Underwater Assault Rifle had already answered one question for the Soviet and later Russian Navy: how to arm frogmen stationed at naval bases beneath the waves. Yet a second, more demanding question lingered. Combat frogmen of the naval Spetsnaz units were sent on assault missions that demanded equal lethality whether they were submerged or operating on dry land. The APS simply could not deliver that dual capability.

Above water its accuracy collapsed to a mere fifty meters, and its barrel, rated for roughly two thousand rounds in its intended underwater role, wore out after as few as one hundred and eighty to two hundred shots in air. As a stopgap, commandos paired the SPP-1 pistol for underwater engagements with the AK-74 for surface fighting, but they regarded this two-weapon arrangement as deeply unsatisfactory. The demand for a single automatic rifle that matched the AK-74 above the surface and the APS below it persisted.

That demand finally crystallized in 1991 at the Artillery Engineering Institute in Tula, where engineer Yuriy Danilov was tasked with the ASM-DT project.

Solving the Barrel Paradox

The central engineering dilemma of the ASM-DT was deceptively simple in statement but far from trivial in execution. Underwater propulsion of a projectile demanded a long, smoothbore barrel, yet achieving any meaningful range in air required rifling to impart spin. Danilov's solution was to make the barrel rifled while keeping the grooves deliberately shallow. These shallow cuts serve a dual purpose: they provide enough spin for accurate above-water fire, and they channel a portion of the propellant gases ahead of the bullet.

That forward-blowing gas pulse has a critical safety function. If a diver surfaces quickly and fires the rifle before the barrel has drained, residual water inside the bore would otherwise create a pressure spike capable of rupturing the tube. The shallow rifling vents that water ahead of the round, preventing a catastrophic burst. Complementing the barrel design, the gas system is engineered to adjust automatically the moment the weapon transitions from submerged to above-water operation, ensuring reliable cycling in both media without the operator needing to make manual changes.

Two Magazines, Two Missions

No single cartridge could satisfy both the underwater and surface roles, so Danilov built the ASM-DT around a dual-feed architecture. The rifle carries two feed slots side by side, allowing the operator to load both an APS-compatible magazine containing 5.45×39 mm MGTS flechettes (also catalogued as 5.66×39/120 mm MPS) and an AK-74-pattern magazine loaded with 5.45×39 mm 7N6 rounds adapted to the ASM-DT's bore. The transition between media is therefore seamless: the diver simply switches which magazine feeds the chamber.

A small mechanical detail makes the change intuitive. The magazine release lever shifts forward when the operator inserts an AK-74 magazine, locking out the underwater feed path and engaging the surface ammunition channel. By reusing the magazine formats of two already-standard weapons, the ASM-DT sidesteps the logistical burden of introducing an entirely new cartridge while still delivering purpose-built performance in each environment.

A Commando's Full-Loadout Platform

Beyond its core dual-medium firing capability, the ASM-DT was conceived as a modular combat platform. The barrel can accept a GP-25 under-barrel grenade launcher for indirect fire, a bayonet for close-quarters engagements, or a PBS sound-and-flash suppressor to reduce the weapon's acoustic and visual signature. A separate flame arrestor is available, and a UPMS blank-firing device enables low-noise shooting in sensitive environments. The receiver accommodates a range of optical and night-vision sights as well as tactical lights, giving the operator flexibility across day, night, and low-visibility conditions.

The stock folds for compact carriage, and the pistol grip, handguard, and folding stock are all molded from impact-resistant plastic, keeping weight down while withstanding the rigors of amphibious service. In terms of raw combat effectiveness, the ASM-DT is rated on par with the AK-74 in air and the APS in water, fulfilling the original Spetsnaz requirement of a single rifle that performs at the level of both predecessors in their respective domains.

Frequently Asked Questions

Why was the ASM-DT developed?

Naval Spetsnaz frogmen had to lug two separate weapons because the APS underwater rifle was wildly inaccurate above water and its barrel wore out after only a few hundred surface rounds. The ASM-DT was conceived to replace that awkward two-gun setup with one rifle that handled both environments.

Who designed the ASM-DT and where?

The rifle was designed by Yuriy Danilov at the Artillery Engineering Institute in Tula, Russia. It remains a prototype rather than a fielded production system.

What ammunition and magazines does the ASM-DT use?

It chambers 5.45×39 mm cartridges, employing the 7N6 round for surface engagements and the longer MGTS (5.66×39/120 mm MPS) cartridge underwater. Magazines are interchangeable: APS-pattern mags for the underwater mode and standard AK-74 mags for above-water use.

More in Russian inventions

Sources

Compiled from Wikipedia and the sources listed below. Text from Wikipedia is available under CC BY-SA 4.0; this entry is adapted from it.

Spotted an error? Know more?

Reader corrections go straight into our review queue. Suggest an edit · How this site is sourced

Comments

Loading…
Open in the interactive codex →