G-Force on Kerbals & Parts

Lore & Background

In the early days of the KSC, every launch briefing carried the same quiet warning from the flight controllers: 'Watch the G-meter, and keep it under eight.' The Kerbals themselves—small, round, and remarkably stubborn—would nod with their stubby arms and say nothing, because in their experience, eight Gs was the ceiling beyond which the world went white and the stars smeared into lines. They called it 'the squeeze,' and veteran pilots learned to read the atmosphere's thickness against their velocity to predict where the squeeze would bite hardest.

The parts, of course, had no voice to warn anyone. A fuel tank rated for six Gs would simply crack along its weld line the instant the reentry profile pushed past that number, spraying propellant across the cockpit glass. Engineers at the KSC learned to match their reentry corridors to the weakest component in the stack, not the strongest, because the sky only needed one part to fail. Over time, a culture of 'gentle arcs' developed—pilots who could thread a needle through the atmosphere at the right angle, keeping peak Gs in the comfortable five-to-seven range, were celebrated with the same reverence as those who achieved orbit on the first try.

There is a particular pride in a landing that keeps the G-meter in the green the entire descent. The Kerbals will bounce once, twice, maybe three times in their seats, and the whole crew will cheer. It is the small, human (well, Kerbal) proof that the machine was built with care and the pilot flew with patience.

Reader's Guide

Rule: Your vessel's G-force is the magnitude of the proper acceleration you feel—thrust, drag, and lift combined, measured relative to Kerbin's 10 m/s². Kerbals pass out at 8 Gs and die if the load is extreme or sustained. Every part has its own maxG; exceed it and the part breaks, potentially cascading into a total loss.

Why it matters: Reentry is the big one. Drag is your enemy when you are moving fast through thick air. A flat, shallow reentry profile at high speed will spike your Gs well past eight. Hard landings, rapid pitch-over maneuvers at high velocity, and aggressive airbrake use are the other common offenders.

Common failure modes: The classic 'I was 200 meters above the ground and my fuel tank just exploded because I pulled up too hard.' Or the Kerbal who goes white-eyed at 30,000 meters because the reentry corridor was too flat. Parts breaking mid-reentry turn a recoverable situation into a debris field.

Pro tips: Aim for peak Gs between five and seven during reentry. Use a steeper entry angle if your vessel is heavy or fast. Avoid pulling up sharply at high Mach numbers—trade a bit of altitude for a gentler arc. Check your weakest part's maxG before flight and design your profile around it. And for landings, let the retrograde burn do the work; do not yank the pitch at the last second.

Did You Know?

• Kerbin's surface gravity of 10 m/s² is the baseline for '1 G' in the game, so the G-meter is essentially a ratio of your felt acceleration to Kerbin's pull.
• A Kerbal who passes out from G-loads does not immediately die; the player gets a brief window to reduce the load before the situation becomes fatal.
• Parts with lower maxG values (like some fuel tanks and structural components) are the usual first casualties in a hard reentry, which is why engineers are told to design around the weakest link.
• The G-force readout in the HUD updates in real time, making it one of the few instruments that tells you what the crew is feeling right now rather than what the orbit will be in the future.